However, many friends who often use diamond saw blades still don't know the difference between them, so what are the differences between them?
1. Sintered diamond saw blade:
It is divided into cold pressing sintering and hot pressing sintering, which are pressed and sintered.
2. Welding diamond saw blade:
There are two types of brazing and laser welding. Brazing is to weld the cutter head and the substrate together through a high-temperature melting medium, such as high-frequency induction brazing saw blades, vacuum brazing saw blades, etc.; The edge in contact with the substrate melts to form a metallurgical bond.
3. Electroplating (brazing) diamond saw blade:
Electroplating (brazing) diamond saw blades attach the blade powder to the substrate by electroplating.
How to maintain the diamond saw blade to prolong its working efficiency and service life?
1. The sharpness of the diamond saw blade will become worse after a period of use, and the cutting surface will also become rough. It should be repaired in time. The original angle cannot be changed or the dynamic balance can not be damaged.
2. The maintenance method of the diamond saw blade. When the diamond saw blade is not processed and used, it should be suspended by the aperture, or placed flat. However, the flat saw blade cannot be stacked or stepped on. Pay attention to moisture and prevent Rust.
3. The maintenance method of the diamond saw blade, the correction of the inner diameter of the diamond saw blade and the processing of the positioning hole must be operated by the manufacturer. Because if the processing is not good, it will not only affect the final use effect of the diamond saw blade, but also may be dangerous. Expansion In principle, the hole should not exceed the original diameter of 20mm, so as not to affect the balance of stress.
