When the linear speed of the diamond saw blade is high, a smaller cutting depth should be selected, and the sawing depth can be selected between 1mm-10mm.
Generally, when sawing granite blocks with a large-diameter saw blade, the sawing depth of the diamond saw blade can be controlled between 1mm-2mm, and the feed speed should be reduced at the same time.
When the linear speed of the diamond saw blade is high, a larger depth of cut should be selected. However, within the range allowed by the performance of the saw machine and the strength of the tool, a larger cutting concentration should be used for cutting to improve cutting efficiency. When there is a requirement for the machined surface, a smaller cutting depth should be used. should be used.
Feed speed refers to the feed speed of the sawed stone. Its size affects the sawing rate, the force on the saw blade and the heat dissipation in the sawing area. This value should be selected according to the nature of the stone to be sawn.