Do you know what is the main cause of stone cutting machine saw blade vibration?

 

1. Spindle radial circular runout ≤ 0.04; flange section runout ≤ 0.08;

 

2. The verticality of the saw blade shaft and the carriage travel track is not more than 0.05mm, and the verticality of the saw blade shaft and the carriage lifting and lowering motion track is not more than 0.05mm.

 

3. Also check whether the fasteners of the stone cutting machine are loose, and re-tighten them if necessary.

 

4. Check the oil level in the oil pool. If it is obviously insufficient, it should be replenished in time.

 

5. Check whether the saw blade swings too much when rotating, and check the exposure of the diamond on the segment, that is, whether the segment is sharp. If the segment is blunt, it can be re-sharpened with refractory bricks.

 

6. Observe whether the operator operates correctly.