1. Check the cables of the rock cutter frequently. If it is damaged, it must be wrapped or replaced immediately to prevent leakage.

 

2. Regularly clean the moisture and dust on the rock cutter to keep the equipment clean.

 

3. When performing rock cutting machine sawing operations, attention should be paid to the waterproof treatment of the heat dissipation port of the main motor to prevent the cooling water from entering the main motor through the heat dissipation port and causing a short circuit.

 

4. The operator of the rock cutting machine must add lubricating oil to each lubrication point of the equipment every day.

 

5. Clean the guide rails and intermediate feed rollers frequently, and apply grease to prevent corrosion.

 

6. After each sawing operation, the dirt on the equipment should be cleaned in time, and the equipment should be cleaned thoroughly once a week to prevent the dirt from rusting the equipment.

 

7. Be careful when operating the mobile station, and don't pull the cable forcibly. The operating table should be placed in a rain-proof place.

 

8. During the cutting process, if there is abnormal sound or abnormal situation, stop the machine immediately for inspection. Regular maintenance of rock cutters is recommended.