Diamond wire saws are widely used in the mining of marble, granite, concrete, etc., but because the fixed material cannot firmly fix the beads during the use of the wire saw, the beads rotate around the wire rope and move along the wire rope, causing the spacing of some beads to change or even connect in a line.

 

So, what to do when the beads rotate during the operation of the diamond wire saw?

 

 

The rotation of the beads is generally caused by the manufacturer, the rubber vulcanization or injection molding process is not strictly controlled.

 

In addition to the above reasons, there are 3 other reasons for the movement of the beads:

 

1. The amount of cutting is too large;

 

2. When the wire rope breaks, the wire saw is twisted into the machine flywheel or encounters other obstacles;

 

3. Other abnormal external forces, for example: before the wire saw stops, it is clamped or pressed by the stone.

 

 

1. Standard use;

 

2. Reduce the amount of cutting;

 

3. Stabilize the quality of injection molding or vulcanization.

 

Diamond wire saw cutting has many advantages. It is suitable for cutting reinforced concrete structures. It is also very suitable for cutting granite, marble and other projects. However, attention should be paid to the beading problem during use, and the frequency of bead rotation should be minimized.