In order to extend the service life of the stone cutting machine and enable it to play an efficient role in mining stone, we need to clean it regularly. The main cleaning methods are as follows:
1. In order to remove the attachments in the pipeline, we can use a non-metallic hammer to tap the oil pipe, either continuously or discontinuously;
2. The stone cutting machine can be cleaned with working hydraulic oil or test oil;
3. The cleaning time is generally 48-60 hours, and can also be determined according to the complexity of the machinery, filtration accuracy requirements, degree of pollution and other factors;
4. After cleaning is completed, the cleaning oil in the circuit should be drained;
5. After cleaning, the hydraulic pump should run continuously until the temperature returns to normal to prevent the machinery from being affected by external moisture and causing corrosion.
Note: The stone cutting machine cannot be cleaned with kerosene, gasoline, alcohol, steam or other liquids to avoid corrosion of hydraulic components, pipes, tanks and seals.