Diamond wire saw is a kind of high-efficiency and energy-saving stone equipment, which is widely used in the industry and favored by customers. The beaded rope is an important part of the wire saw machine and is responsible for cutting the material. Therefore, the wear of the wire rope is very serious. So what are the factors that cause wire saw wear? Details are as follows.
 
1. When the feed speed of the wire saw machine increases, the wear of the beaded rope increases. Since beaded ropes are more expensive, production costs will increase.
 
Therefore, the feed speed cannot be blindly increased in pursuit of output. The feeding speed with the best comprehensive economic indicators should be selected through a comprehensive analysis of market supply and demand, beaded rope prices, stone prices, labor costs and other factors.
 
Since the surface of block materials is often uneven, in order to prevent the diamond wire saw from breaking or even breaking due to stress impact during initial cutting, the feed speed should be 20%-30% lower than the normal sawing feed speed. Wait until the beading rope is completely inserted into the rough surface. After feeding, increase the feed speed.

 
2. The cutting speed of the diamond wire saw is closely related to the stone type, bead type, stone length and other factors.
 
For the same processing equipment, when the bead rope or stone type changes, the sawing speed should be changed accordingly to obtain the maximum wear resistance rate. After replacing the new bead rope, it is best to saw soft stones first. And reduce the sawing speed and feed speed to facilitate diamond cutting.