Stone mining cutting machine is a machine commonly used in stone factories to mine stone. The mining saw can work continuously for a long time, mining a large amount of stone and reducing labor input.
 
No matter how good the stone machinery is, if it is not used and maintained properly, it will cause the stone machinery to enter the damage period ahead of time and become unusable. This will reduce the amount of stone mining, and at the same time increase the stone factory's capital investment in stone machinery.
 
1. First of all, we must install the machine correctly according to the instructions in the manual. The foundation, pre-embedded anchor bolts, foundation size and location shall meet the requirements of the drawings. The electrical installation of the stone mining cutting machine should be carried out by electrical professional technicians, and must be installed and inspected in strict accordance with the electrical wiring diagram to ensure correctness.
 
2. Debug the machine well. Before use, ensure the correctness and firmness of each protective (dustproof) device, ensure that the electrical wiring diagram is correct, adjust the firmness of the motor and the tightness of the belt and chain to the best state, check the operation of the main drive motor shaft, Each transmission mechanism operates flexibly without obvious jamming. Check the working conditions of each control handle and button to ensure that they are sensitive and effective.
 
3. Inject lubricating oil. After checking the link of the stone mine cutting machine, we need to check the degree of lubrication of the machine, and lubricate all lubrication points, and the injected oil should be kept clean.
 
4. During the test, attention should be paid to check the current changes of the main motor, the traverse motor and the load changes of other motors, and check the operation and sound of each part of the stone cutting machine. At the same time, pay attention to whether the temperature rise of the bearing is normal.