Wanlong Horizontal Edge polishier ---Multi Heads


 
Automatic straight edge, chamfering polishing machine with multi-heads, which made as OEM service, design as per customer production request by realizing various functions: slotting, cutting, chamfering, bevel edge polishing and straight edge polishing, Has good feedback from Euro of high speed, high efficency, strong luster, good straightness, and low cost.
 
And no matter what the degree of thickness of stone slabs/tiles, processing Angle width can be perfectly.
 
Stable QUALITY, low abrasive wear, easy to operate, greatly saves labor costs.

Technical parameter
 
Item  subject Details
1 Blade cutter for Frontal(upper) side 1pc×φ250mm
2 Auto motor control degree l  30/45°for chamfering l  90°for slotting(groove cutting)
3 Frontal beveling and polishing 4Pcs suggested, others available upon request
4 Edge polishing l  Straight only:6pcs pads×φ125-160mm suggested l  Shapes profiling: 6-8pcs wheels of any shapes available upon request.
5 Blade cutter for Rear(down) side 1pc×φ250mm
6 Rear beveling and polishing 2pcs suggested, others available upon request
 7 Processing thickness 10-60mm
8 Maxium width 120-1200mm (more width available after negocation)
9 Poslihing speed 0.5-2m/min
10 Weight Depends on your final request
11 Overall size（L*W*H）
12 Total power
 
Need your details Functions confirmation as list below for right quotation of your machine:
 
1.The Blade for Chamfering:


 
Diameter of blade: Dia250mm
 
Chamfering degree: 30/45/90 degree Available:
 
I.Standard choice: Manual chamfering degree adjusting 30/40°
 
II.Optional Choice: Auto control motor with additional cost, Adjust 30/45°for chamfering,
 
90°for Slotting/groove opening
 
2.Frontal(upper side) beveling and polishing:


 
Standard Suggestion 4heads for polishing Glossiness more than 100°
 
Motor power:1.5KW, 1motor controls 2 polishing heads
 
Diameter of polishing pads wheel as Dia125mm
 
3.Edge Profiling & polising : 6-8 heads D125 with different grits
 
I.Choice 1: Straight edge polishing only: Suggest Pads type, for Granite 6heads Glossiness more than 100°

 
II.Choice 2:Straight and shapes polishing: Wheel types as below 6-8heads Glossiness more than 100°

 
Shapes including but no limited to (any shapes ok upon drawings ):

 
4.Rear (down back) side:1pcs Blade D300 for chamfering, Motor power as 5.5KW


 
5. Polishing head with Diameter 125mm pads wheel after Rear cutting, if you need good glossiness, or not suggested.


 
6. Other Functions are available upon request by showing your drawings/output pictures.