The stone calibrating machine is a common stone equipment in stone processing equipment. It is used before stone polishing to prepare for stone polishing, thereby saving polishing time and processing costs. As long as it is a machine, there are always uncontrollable situations. So, what problems should be paid attention to during the use of the stone calibrating machine?
 
First of all, we must carefully review the processing order, select raw materials of different thicknesses as required, and process them separately.
 
Secondly, during the operation of the stone calibrating machine.
 
1. Connect the external power supply of the stone calibrating machine.
 
2. Adjust the width of the conveyor belt pressure plate. According to the size of the raw material, adjust the conveyor belt pressure plate with a hand crank handle, which is generally 10-15mm larger than the raw material size.
 
3. Adjust the height of the cutter disc. The calibrating machine has three cutter discs, and the processing capacity of each cutter disc is 1mm. From front to back, the cutter disc is from high to low.
 
4. Test the machine. Start the cutter disc to test the material, and then adjust the processing capacity of the cutter disc according to the actual situation.

 
Finally, pay attention to the following aspects when operating the stone calibrating machine.
 
1. Avoid increasing the processing volume and workload of the stone calibrating machine.
 
2. The transmission speed should be appropriate.
 
3. The cutter head should not be fully opened when the processing volume is small.
 
4. Try to avoid breaking the plate and breaking the corners.